Patient guide

Digital dentistry: what scanning, design and mock-ups change in your treatment

A scan instead of impression putty, a design on screen, and a trial smile over your teeth before any preparation. These tools genuinely change your experience in the chair, but they do not replace the examination, the x-rays or the dentist's judgement.

"Digital" now appears in almost every dental advert: digital design, digital smile, 3D scanner. It is fair to ask what it actually means for you.

The honest answer is that a digital tool does not create a smile on its own. What it does is reduce guesswork: it records your teeth precisely, shows you the proposed shape before a tooth is touched, and carries what we agreed on into the ceramic without it getting lost along the way. Deciding what your mouth needs, and how to carry it out, remains a clinical decision made after an examination.

At Orchid Dental we use three digital tools specifically: intraoral scanning in place of conventional impressions, CAD/CAM design and milling of ceramic restorations with their margins checked before bonding, and mock-ups made with 3D printing. Here is what each one changes in your treatment, and where its limits lie.

Intraoral scanning: what changes when the impression tray disappears?

Many people remember the conventional impression: a tray of putty held in the mouth until it sets, which makes some people gag. A scanner replaces it with a small wand passed over the teeth, building a three-dimensional copy of your teeth, gums and bite on screen.

The first change is comfort. A systematic review of clinical studies comparing the two found that patients generally preferred scanning and found it more comfortable, and that it was usually quicker. If one area is not captured clearly, only that area is rescanned, rather than repeating the whole impression.

Then accuracy. For single crowns and short bridges, systematic reviews found scanning as accurate as conventional impressions, and the margins of single ceramic crowns did not differ significantly between the two methods. For full-arch scans, as in extensive cases, the evidence is less settled: one systematic review found conventional impressions more accurate. So the method is chosen case by case.

Scanning also has a clear limit: it records only what it can see. If saliva or bleeding gum covers the edge of a prepared tooth, or the edge sits deep under inflamed gum, it will not be captured clearly, and the same is true of a conventional impression. That is why healthy gums come first, and the scan second.

From photo to mock-up: see your smile and try it before any preparation

Cosmetic planning starts with photographs, on which we draw the proposed length and proportions of the teeth and the smile line against your lips; the steps are set out on our digital smile design page. What the digital tools add is the step from a flat photo to your actual mouth. The design is moved onto the three-dimensional scan and 3D-printed, and from the print we make a mock-up that sits over your teeth as they are, with no preparation and no bonding. You see it in the mirror, talk and smile with it, and any change is made on the mock-up, not on your teeth.

It tests shape, not colour: the ceramic's shade and translucency do not show in it. It also shows what will be added to a tooth more clearly than what will be taken away. A mock-up cannot move a tooth that sits forward of the agreed line back into place, so that part of the plan is explained on the design instead.

The mock-up has a less familiar benefit: it guides preparation. A porcelain veneer, which many patients in Saudi Arabia call "dental lenses", needs a certain thickness. Measured from the tooth's current surface, preparation removes more than necessary wherever length or fullness is being added. Measured from the surface of the agreed shape, it removes only what the veneer needs. This approach, described in the clinical literature, keeps more enamel, and bonding to enamel is more predictable. Our guide do veneers damage teeth? explains why we guard that enamel.

CAD/CAM design and milling: from file to ceramic, with a margin check

CAD/CAM stands for computer-aided design and manufacturing. Once a tooth is prepared and scanned, the restoration is designed on screen, whether a veneer, a crown or a partial ceramic restoration (an onlay). The design sets the margin line, the ceramic thickness, the contacts with neighbouring teeth and the bite, and the restoration is then milled from a solid ceramic block. The shape you tried as a mock-up can be carried into the design itself, so the work does not start from scratch or from a verbal description.

The margin is one of the main things that decide how long a restoration lasts and how healthy the gum around it stays, as our guide on ill-fitting crown margins explains. So no restoration is bonded before its margins are checked on the tooth: the margin should meet the tooth closely, with no detectable gap or ledge, the contacts should be right, and the colour should blend. If not, the restoration is adjusted or remade before bonding, not after. Then come touches no machine makes: characterising the ceramic's colour and finishing its surface by hand.

A further benefit shows years later: the scan remains a file. A new scan at a follow-up visit can be overlaid on the old one to see whether wear is progressing, whether from teeth grinding or acid erosion. Research presents this as a promising aid, provided the scans are aligned properly and the result is read alongside the examination and your history, never on its own.

What digital tools do not replace

A scanner sees the surface, not what lies beneath. The clinical examination remains the foundation: the gums, the bite, decay, old fillings, the vitality of the nerve, and what bothers you, as our first-visit guide explains. X-rays keep a role a scan cannot fill: finding decay between teeth or under old crowns, and showing the root tips and the bone around them.

Diagnosis and the dentist's judgement remain. A digital tool carries out a decision precisely; it does not make it. Do you need veneers at all, or would whitening or a cosmetic filling do? Would an orthodontist's opinion be worth having first? No software answers those questions, and an unsuitable plan carried out digitally is simply a precise mistake.

The work of the hands remains: preparing the tooth within the design, keeping it dry, bonding the ceramic through steps that cannot be rushed, and adjusting the bite afterwards. So does the ceramist's craft. Technology supports skilled hands; it does not replace them.

ToolWhat it changes for youWhat it does not replace
Intraoral scanningAn alternative to impression putty that many patients prefer, and a precise copy of teeth and biteThe clinical exam, x-rays, and healthy gums before scanning
Smile design and mock-upYou see and try the shape before any preparation; reduction is measured from the agreed shapeChoosing the right treatment, and checking the ceramic's colour before bonding
CAD/CAM design and millingThe agreed shape carried into ceramic; margins checked before bondingSkilled preparation and bonding, and the finishing touches of colour
Scan filesComparing wear over timeRegular check-ups and your history

When you hear "digital" at any clinic, ask: will I try the design on my teeth before preparation? Will my gums be examined and x-rays taken first? How are margins checked before bonding? The whole journey is in our guide to veneers step by step.

Dr. Abdullah Bokhary is an Esthetic & Restorative Dentistry Consultant at Orchid Dental in Al Khalidiyyah, Jeddah. To find out which of these steps apply to you, send us a clear daylight photo of your smile on WhatsApp for a first opinion. The examination decides.

Common questions

Common questions about this treatment

Is a digital scan more accurate than a conventional impression?

For single crowns and short bridges, systematic reviews found it as accurate as a conventional impression. For full-arch scans the evidence is less settled, and one systematic review favoured conventional impressions, so the method is chosen case by case.

Does a mock-up require drilling my teeth?

No. It sits over your teeth as they are, with no preparation and no bonding, and comes off easily after the trial. It shows shape and proportions, not the colour or translucency of the ceramic.

If I like the design, will the result match it exactly?

A design is a plan, not a promise. Ceramic differs from the mock-up in colour, translucency and surface texture, so we review shape, margins and colour at the try-in before bonding, and small details may need adjusting.

I already have a digital scan. Do I still need x-rays?

Usually, yes. A scan records only the surface of the teeth and gums; decay between teeth or under old fillings, the root tips and the bone need x-rays alongside the examination. The examination decides which ones your case needs.

Can I send a photo on WhatsApp?

Yes. A clear daylight photo of your smile, with a line about what bothers you, is enough for a first opinion on which steps may apply to your case. A photo is not a verdict; the examination decides.

References

Peer-reviewed sources.

  1. Siqueira R, Galli M, Chen Z, Mendonça G, Meirelles L, Wang HL, Chan HL. Intraoral scanning reduces procedure time and improves patient comfort in fixed prosthodontics and implant dentistry: a systematic review. Clin Oral Investig. 2021;25(12):6517-6531 doi.org/10.1007/s00784-021-04157-3
  2. Ahlholm P, Sipilä K, Vallittu P, Jakonen M, Kotiranta U. Digital Versus Conventional Impressions in Fixed Prosthodontics: A Review. J Prosthodont. 2018;27(1):35-41 doi.org/10.1111/jopr.12527
  3. Tsirogiannis P, Reissmann DR, Heydecke G. Evaluation of the marginal fit of single-unit, complete-coverage ceramic restorations fabricated after digital and conventional impressions: A systematic review and meta-analysis. J Prosthet Dent. 2016;116(3):328-335.e2 doi.org/10.1016/j.prosdent.2016.01.028
  4. Zimmermann M, Mehl A. Virtual smile design systems: a current review. Int J Comput Dent. 2015;18(4):303-317 pubmed.ncbi.nlm.nih.gov/26734665/
  5. Magne P, Belser UC. Novel porcelain laminate preparation approach driven by a diagnostic mock-up. J Esthet Restor Dent. 2004;16(1):7-16 doi.org/10.1111/j.1708-8240.2004.tb00444.x
  6. O'Toole S, Marro F, Loomans BAC, Mehta SB. Monitoring of erosive tooth wear: what to use and when to use it. Br Dent J. 2023;234(6):463-467 doi.org/10.1038/s41415-023-5623-1
  7. Marro F, Jacquet W, Martens L, Keeling A, Bartlett D, O'Toole S. Quantifying increased rates of erosive tooth wear progression in the early permanent dentition. J Dent. 2020;93:103282 doi.org/10.1016/j.jdent.2020.103282

General education; the examination decides what suits your case. A clinical consultation determines whether any treatment suits your case — no prices are listed and no results are guaranteed.